Mining-grade carbide teeth.
The cutter head features 8 steel teeth that are tipped with mining-grade tungsten carbide, a material 10 times harder than steel and which is used for drilling through bedrock. Spinning at 2800 rpm, these teeth take a remarkable 360 "bites" per second!
Hitch up the DR Strump Grinder to your ATV or lawn tractor and tow the machine to the working area.
With lugged, high-flotation tires and a lightweight design, the DR Stump Grinder is easy to transport to any stump on your property and because of their size, the tyres keep the machine elevated over the growing wood chip pile as you grind a stump away.
The compact overhead valve design of the Briggs and Stratton 1450 Series engine enables it to run cooler and cleaner, delivering increased power, longer engine life and improved fuel economy.
Position the DR Stump Grinder over a stump, lock one wheel in place with the wheel brake, engage the cutting head, and pivot easily from side to side, shaving an inch or so with each pass. Reposition the machine and repeat until the entire stump is reduced to a pile of wood chips
|Engine||Briggs & Stratton OHV|
|Ft Lbs Torque||14.50|
|Number of cylinders||1|
|Fuel Tank Capacity||3 Litres|
|Chassis||12 Gauge Steel|
|Cutter Disc Diameter||266mm / 10.5"|
|Number of Cutter Teeth||8|
|Controls||Wheel Lock, Throttle|
|Dimensions (LxWxH)||130cm x 74cm x 99cm (max)|
|Handle height adjustment||Yes|
|Handlebar Height||81cm - 93cm - 102cm (32" - 36.5" - 40")|
|Maximum Ground Penetration||TBC|
|Tyre Size||15 x 4.75"|
|Vibration Level (m/s2)||TBC|
|Warranty Commercial||90 Days|
|Warranty Domestic||2 Years|
Use the link below to view / download a copy of the user manual for this product.